La Vie Velominatus: Lean Properly

Bikes leaning at the gite, waiting to hit the cobbles on Keepers Tour 2013.

There are always at least two ways to accomplish any task: properly and improperly. Drinking beer from a glass, not the bottle; carrying a full umbrella instead of a miniature fold-up; stirring your gin martinis, not shaking them; wearing french cuffs with a suit, not button cuffs. The Velominatus, of course, is drawn towards doing things Properly, even when doing so comes at the expense of convenience.

While its true that doing something correctly may not always be the same as doing something the easy way, when it comes to the practice of leaning one’s bicycle against a wall, doing so properly is is maddeningly easy. Bicycles have wheels and wheels are what enable the mode of forward locomotion that brings us such pleasure. The fine print indicates, however, that these wheels are not biased towards forward motion. On the contrary, wheels are quite happy to roll in any direction they please, provided gravity or an external force provide ample reason to do so. And, despite being more than sturdy enough to bound down a cobbled farm track at high speed, bicycles are rather delicate things not suited for rolling off unsupervised. Derailleur hangers are easily bent, paintwork is easily scratched, and bar tape and saddles easily scuffed when wheels start unexpectedly rolling and steeds fall over.

For this reason, it is critical that one practices safe leaning:

  1. When leaning your loyal steed against a well, care must be taken to lean the bike by its saddle and by its inside hood. There are several reasons for this including the notion that neither the saddle (made of lightly padded leather) nor the hood (made of rubber) are as wont to slip as is the frame. Leaning it by the hood also ensures the front wheel is pointing parallel to the wall, not away from it, offering an additional bit of insurance against an errant roll-away. Should one be leaning their bicycle against something too low to make saddle contact, the rear wheel and hood makes for a viable alternate.
  2. Lean the machine with the mechanicals facing out. This will help avoid inadvertently crushing the derailleur against the wall and bending the rear derailleur hanger. That said, among Keepers polled, only one (who, in order to protect Brett’s identity, shall remain anonymous) made the case that keeping the mechs facing inward protects them from being brushed up against. Use your discretion here, but if leaning in, make sure ample space is left to prevent contact with the drivetrain and the wall.
  3. When leaning a group of bikes against the wall, lean them all in the same direction such that the front wheel of the bike to the left overlaps with the back wheel of the bike to the right. This allows for a compact stacking of machines, prevents tangling of bars or other forms of damage-inducing fraternization between bikes, and allows any of the bikes to be removed from its place in the line without moving adjacent machines. While point two allows for the choice of facing in or out, when leaning groups of bikes against the wall, care will be taken to lean them all in the same direction and in this case facing mechanicals out will help prevent accidentally catching a wheel in a derailleur.
  4. If leaning a bike against something smaller than a wall, the safest way to do so is to lean it only by the rear wheel, ensuring ample lean is given and that the orientation of the bicycle is chosen to minimize likelihood of the machine suddenly making a break for it. Leaning it against just the saddle is also an option should a stable leaning point be available. Under no circumstances is one to lean the bike by any part of the frame.
  5. If your bicycle should begin to fall or to move in any way, you are to drop whatever you are  doing and use your own or a nearby companion’s body to arrest the fall and prevent damage of any sort to the machine. You should be willing to sacrifice personal injury by way of means to this end. Be it your child or your bong, drop that thing and make haste to rescue your machine. Rule #4, fucktards.

Vive la Vie Velominatus.

frank

The founder of Velominati and curator of The Rules, Frank was born in the Dutch colonies of Minnesota. His boundless physical talents are carefully canceled out by his equally boundless enthusiasm for drinking. Coffee, beer, wine, if it’s in a container, he will enjoy it, a lot of it. He currently lives in Seattle. He loves riding in the rain and scheduling visits with the Man with the Hammer just to be reminded of the privilege it is to feel completely depleted. He holds down a technology job the description of which no-one really understands and his interests outside of Cycling and drinking are Cycling and drinking. As devoted aesthete, the only thing more important to him than riding a bike well is looking good doing it. Frank is co-author along with the other Keepers of the Cog of the popular book, The Rules, The Way of the Cycling Disciple and also writes a monthly column for the magazine, Cyclist. He is also currently working on the first follow-up to The Rules, tentatively entitled The Hardmen. Email him directly at rouleur@velominati.com.

View Comments

  • @Dr C

    Thanks @nickleggs - for me, this confirms Wiggo as the coolest person on the planet currently

    Currently. But it wasn't always so.

  • @frank

    @brett

    Just goes to show that just cuz you run a bike shop doesn't mean you know fuck all about bikes.

    @TBONE

    It should be noted that I'm rolling with cufflinks and my locally made full size umbrella today. One of my coworkers asked me 'Who spends $80 on an umbrella?' I shot back with 'Someone without two kids.' The topic was never broached again.

    Good man. Here's mine, a gift when I moved to Seattle.

    Do you have to wear a hat and a special suit with that? You must look a right twot walking into the office with that in your commuting kit.

    I do like a good brolly. Unfortunately, I keep leaving them on trains.

  • Im all for proper leaning but always go for the saddle & rear wheel combo, shifter hoods are too close to scratchable surfaces like the dial covers and levers for my liking! If I ever have to lock up my mount (Prophet Forgive me!) I even try to put something soft between the frame & the lock! Not to mention all bike parking facilities are impossible to lean up on properly!

  • @Chris

    @frank

    @brett

    Just goes to show that just cuz you run a bike shop doesn't mean you know fuck all about bikes.

    @TBONE

    It should be noted that I'm rolling with cufflinks and my locally made full size umbrella today. One of my coworkers asked me 'Who spends $80 on an umbrella?' I shot back with 'Someone without two kids.' The topic was never broached again.

    Good man. Here's mine, a gift when I moved to Seattle.

    Do you have to wear a hat and a special suit with that? You must look a right twot walking into the office with that in your commuting kit.

    I do like a good brolly. Unfortunately, I keep leaving them on trains.

    That may look like a brolly, but there's a katana concealed inside it.

  • No, it's too much.

    Live and let live, each to their own is fine by me so an occasional variation from the norm is OK.

    But this is a site where perfection is always to be sought, where the length of your socks may cause serious offence, where bar tape is wrapped and re-wrapped to finish to the mm correct position.

    The lead photo shows a set of bikes looking like debs at a coming out ball or prom, waiting for their undoubtedly handsome partners to whisk them away, and standing on the end of the line is some poor lass who is wearing 6" heels and short short skirt.

    We know the dutch monkey has his own ways, and will seek the enlightment of the V, but that seat post  -- aaargh.

  • @Nate Nope. That's a custom protective cover for that ridiculously long seat post of his. Carries it everywhere, he does,  afraid that if someone pinches it he'll never find another one.

  • @the Engine

    Holy Public Sector Workers Batman - that's my shoe and bib combo right there

    How the hell can you tell from that photo that those are your bibs? Please don't say it's because you recognize the chamois.

    @scaler911

    Solid article Dutch Monkey. Tho for anyone that's shelled out half a years mortgage payments on their whip, this should be a given.

    My steel rig was parked in my parents garage years ago when I stopped by to visit for a hour. It was stowed properly. Dad went to get something, and my precious was in the way. He moved it, leaned it on the corner of a post using the top tube as the contact point. I got to the garage just in time to see the bike roll forward, imparting a deep scratch from fore to aft thru the paint, followed by it running into his car, before hitting the ground. There was heated discussion that, no matter your age, you'll never win against your parents.

    I hope you keyed his car.

1 5 6 7 8 9 19
Share
Published by
frank

Recent Posts

Anatomy of a Photo: Sock & Shoe Game

I know as well as any of you that I've been checked out lately, kind…

7 years ago

Velominati Super Prestige: Men’s World Championship Road Race 2017

Peter Sagan has undergone quite the transformation over the years; starting as a brash and…

7 years ago

Velominati Super Prestige: Women’s World Championship Road Race 2017

The Women's road race has to be my favorite one-day road race after Paris-Roubaix and…

7 years ago

Velominati Super Prestige: Vuelta a España 2017

Holy fuckballs. I've never been this late ever on a VSP. I mean, I've missed…

7 years ago

Velominati Super Prestige: Clasica Ciclista San Sebastian 2017

This week we are currently in is the most boring week of the year. After…

7 years ago

Route Finding

I have memories of my life before Cycling, but as the years wear slowly on…

7 years ago