All in a line; the wheels.

Its hard to say precisely where the line lays, but I’m certain I’m well on the wrong side of it. I never notice lines as I pass over them but I can usually tell after I have because it feels suddenly liberating to leave reason, sensibility, and convention behind. I find them very restrictive – claustrophobic, almost. They force me into the same old way of thinking, always within a set of parameters of what is accepted. Parameters are a good thing, to be sure – especially for everyone else – but since I wasn’t involved in defining The Universal Limits of Reason and Sensibility, I can’t be sure they’re calibrated correctly so I prefer to roam freely and am quite satisfied to be considered crazy for the time being.

Just like most of us, I started down La Vie Velominatus rolling along on the wheels my first bike arrived with. I trusted them to be indestructible and always carry me about safely. Then one day while racing my friend, I locked up the back wheel coming into a corner too hard and destroyed it, the illusion of The Indestructible Wheel riding up the road alongside the friend I had only moments earlier been locked in shoulder-to-shoulder battle with. It was also at this precise moment that I faced the reality that a wheel is not only destructible, but a basic element facilitating productive locomotion aboard a bicycle.

I spent the next month shingling the roof of my family’s cabin in Northern Minnesota earning the money to buy a replacement wheel. And, having recently shingled a roof, I was suddenly a Shingling Authority, discussing in depth the merits of choice in color, material, and shingle pattern of every roof I passed by. Similarly, upon having been subjected to the myriad choices of replacement wheel, after purchasing my replacement wheel, I was a new inductee into the The Order of the Wheel and noticed (and commented upon) every bicycle wheel that passed me by. Due more to the volume of by observations than their merit, I was soon thereafter indulged by my Cycling Senseimy father – to help him curate the wheels for his custom Eddy Merckx.

At the time, choices were more limited than they are today; quality of hub varied greatly, as did the rims, spokes, and tires. Everything was limited to an alloy of some kind, though you could have any spoke pattern you wanted, as long as it was 3-cross. At the time there was also a choice between tubular and clincher, which was a relatively new option. We labored over the choices and wound up having two wheelsets built – one clincher and aero; one box-section and tubular – a choice I stand by today.

That was my awakening, but nevertheless, I have throughout my life as a Velominatus had only one wheelset per bike. The lightest for Bike #1. Whenever Bike #n came into play, it received  its own wheelset; as with all the other parts on Bikes #2…n; a hand-me-down from Bike #n-1’s upgrade. (Using the Hand-Me-Down Upgrade Methodology, a single upgrade improves not just one bicycle, but several – with the added benefit of filling a longer period of time moving bits from one noble steed to the next.)

It was only recently, during preparation for the 2012 edition of Keepers Tour over the cobbles of Northern France and Vlaanderen, that I took my own place in the realm of the Specialty Wheelset – which also afforded me another of those moments when I was strangely aware of having crossed one of Those Lines. After all, a big, fat Dutchman can’t be expected to ride over the pavé of Paris-Roubaix – unleashing the awesome wattage of his artillery – on just any old wheelset; certainly not any of those wheels which I already owned. This called for a set of wheels purpose-built for the occasion. Rims, hubs, spokes, and tires were selected with great care and assembled (four times) in a wine-enhanced rite.

Riding these wheels is a pleasure highlighted by the fact that I don’t always ride them. They hang on the workshop wall in a wheel bag, waiting for the Right Occasion to ride them. Those occasions are often anticipated several days – if not weeks – in advance and deliberated over carefully. Then, when the choice is finally made to pop them in for the ride, I wrap myself in the delta between my regular wheels and these. This contrast, like the negative space in a great painting, is the area in which I dwell while riding them. The difference in tire type, width, spoke pattern, weight. The way the wheel feels when the pedal is engaged. The way the wheels and tires flex over a bump in the road or hug the pavement in a corner.

I’ve since embarked on a journey to get each road bike in the house – mine as well as the VMH’s – on the same drive train in order to be able to maximize the wheel-swapping effect. Each wheel is a new language, each tire a new dialect, and inner tube a new turn of phrase. To paraphrase the nursery rhyme: one for sorrow, two for joy, three for hills and four for stones.

frank

The founder of Velominati and curator of The Rules, Frank was born in the Dutch colonies of Minnesota. His boundless physical talents are carefully canceled out by his equally boundless enthusiasm for drinking. Coffee, beer, wine, if it’s in a container, he will enjoy it, a lot of it. He currently lives in Seattle. He loves riding in the rain and scheduling visits with the Man with the Hammer just to be reminded of the privilege it is to feel completely depleted. He holds down a technology job the description of which no-one really understands and his interests outside of Cycling and drinking are Cycling and drinking. As devoted aesthete, the only thing more important to him than riding a bike well is looking good doing it. Frank is co-author along with the other Keepers of the Cog of the popular book, The Rules, The Way of the Cycling Disciple and also writes a monthly column for the magazine, Cyclist. He is also currently working on the first follow-up to The Rules, tentatively entitled The Hardmen. Email him directly at rouleur@velominati.com.

View Comments

  • @Oli

    Thanks as always, I've got a pair of the Arenberg tubulars for my next gluing session but am inclined to let them age a few months before I fit them.

  • @the Engine If i can stick my beak in here, but if your wheels are radially laced on the non drive side, and you're getting them rebuilt completely by your LBS, it might be an idea to see if they can do a crossed lacing pattern on the NDS? If you're not breaking spokes there ignore that comment, and the hub may be designed in such a way that you can't use that lacing pattern, but probably worth discussing with your LBS.

    I'm basically on my way to being a retrogrouch, and think that unless you have a ksyrium/shimano quality rim (heavily overbuilt, very strong rim, very strong spokes, optimised flanges) then radial lacing on the NDS is a subpar lacing pattern, especially if using off the shelf bits.

    Oli's right about 3x 32 hole wheels as well, I've got a set of Ultegra wheels in the shed (not on a bike) in preference to 3 sets of 3 cross clinchers.

  • @Nate No worries, mate.

    For Ron I should clarify that the ones I'm riding are the Masters, which are clinchers.

  • @minion

    @the Engine If i can stick my beak in here, but if your wheels are radially laced on the non drive side, and you're getting them rebuilt completely by your LBS, it might be an idea to see if they can do a crossed lacing pattern on the NDS? If you're not breaking spokes there ignore that comment, and the hub may be designed in such a way that you can't use that lacing pattern, but probably worth discussing with your LBS.

    I'm basically on my way to being a retrogrouch, and think that unless you have a ksyrium/shimano quality rim (heavily overbuilt, very strong rim, very strong spokes, optimised flanges) then radial lacing on the NDS is a subpar lacing pattern, especially if using off the shelf bits.

    Oli's right about 3x 32 hole wheels as well, I've got a set of Ultegra wheels in the shed (not on a bike) in preference to 3 sets of 3 cross clinchers.

    Laced both sides - but point taken on asking for a more industrial strength pattern if it's feasible with the hub and rim as is. The only possible variable at the moment is spokes and patterns and I now realise - as with much in my life - I just haven't a clue.

  • @Oli

    @the Engine You are the perfect candidate for the classic box section 32 spoke 3 cross wheel. I wouldn't underestimate the combination of strength, reliability and superb ride quality of a wheelset like this even if, at first glance, it seems somewhat pedestrian.

    @Ron Here are two of my wheels for you to have a squizz at. Please disregard the aesthetics of the white tyre for now.

    [dmalbum: path="/velominati.com/wp-content/uploads/readers/Oli Brooke-White/2012.09.25.21.28.33/"/]

    Thanks Oli - you really should consider emigrating to Scotland. There's no point in me having superb wheels if they can't take the punishment that me and the roads dish out - I'll go for strength long before weight and aero.

  • Great article and posts, you guys are nailing it as usual.

    My 2c...

    Race wheels are for racing. i.e. tubulars should be left at home for bunch rides, or expect to be left on the side of the road while you struggle with changing a flat. At least if you're riding with me. Although I know no-one who is rich/lucky enough to own carbon tubs anyway!

    Box section 3x can't be beat. Ambrosios or Open Pros are proven and look great. Black rims, shiny hubs and spokes. Yeah.

    I would love me a set of Hyperon clinchers though...

  • @Buck Rogers

    @Skinnyphat

    @frank just like your n+1 bike theory, I have an n+1 wheel set theory, being that you should have one more set of wheels than bikes. I currently have 2 road bikes with aluminum clinchers (Mavic Ksyrium for bad weather), carbon clincher (Boyd 50mm for everyday baddassery), and Carbon Tubs (Easton EC90 Aero for racing and ultimate climbing and, more importantly, descending).  Built up with a variety of gearing I can accomplish any type of ride/terrain at any time, as they're all interchangable on both bikes.

    And yes I like to buy lots of expensive bike shit.

    how are the EC90 carbon aero tubs?  I am considering a pair of these.

    The Easton EC90s are great wheels. Extremely light for the price, obviously aeron, and the ceramic bearings are silky. I highly recommend.

  • @Oli

    Here are two of my wheels for you to have a squizz at. Please disregard the aesthetics of the white tyre for now.

    May I humbly request that no one have a squizz, and if you do - please keep it quiet and to yourself?

  • @frank

    @Oli

    Here are two of my wheels for you to have a squizz at. Please disregard the aesthetics of the white tyre for now.

    May I humbly request that no one have a squizz, and if you do - please keep it quiet and to yourself?

    That just grouse, mate.

1 6 7 8 9 10 20
Share
Published by
frank

Recent Posts

Anatomy of a Photo: Sock & Shoe Game

I know as well as any of you that I've been checked out lately, kind…

7 years ago

Velominati Super Prestige: Men’s World Championship Road Race 2017

Peter Sagan has undergone quite the transformation over the years; starting as a brash and…

7 years ago

Velominati Super Prestige: Women’s World Championship Road Race 2017

The Women's road race has to be my favorite one-day road race after Paris-Roubaix and…

7 years ago

Velominati Super Prestige: Vuelta a España 2017

Holy fuckballs. I've never been this late ever on a VSP. I mean, I've missed…

7 years ago

Velominati Super Prestige: Clasica Ciclista San Sebastian 2017

This week we are currently in is the most boring week of the year. After…

7 years ago

Route Finding

I have memories of my life before Cycling, but as the years wear slowly on…

7 years ago