All in a line; the wheels.

Its hard to say precisely where the line lays, but I’m certain I’m well on the wrong side of it. I never notice lines as I pass over them but I can usually tell after I have because it feels suddenly liberating to leave reason, sensibility, and convention behind. I find them very restrictive – claustrophobic, almost. They force me into the same old way of thinking, always within a set of parameters of what is accepted. Parameters are a good thing, to be sure – especially for everyone else – but since I wasn’t involved in defining The Universal Limits of Reason and Sensibility, I can’t be sure they’re calibrated correctly so I prefer to roam freely and am quite satisfied to be considered crazy for the time being.

Just like most of us, I started down La Vie Velominatus rolling along on the wheels my first bike arrived with. I trusted them to be indestructible and always carry me about safely. Then one day while racing my friend, I locked up the back wheel coming into a corner too hard and destroyed it, the illusion of The Indestructible Wheel riding up the road alongside the friend I had only moments earlier been locked in shoulder-to-shoulder battle with. It was also at this precise moment that I faced the reality that a wheel is not only destructible, but a basic element facilitating productive locomotion aboard a bicycle.

I spent the next month shingling the roof of my family’s cabin in Northern Minnesota earning the money to buy a replacement wheel. And, having recently shingled a roof, I was suddenly a Shingling Authority, discussing in depth the merits of choice in color, material, and shingle pattern of every roof I passed by. Similarly, upon having been subjected to the myriad choices of replacement wheel, after purchasing my replacement wheel, I was a new inductee into the The Order of the Wheel and noticed (and commented upon) every bicycle wheel that passed me by. Due more to the volume of by observations than their merit, I was soon thereafter indulged by my Cycling Senseimy father – to help him curate the wheels for his custom Eddy Merckx.

At the time, choices were more limited than they are today; quality of hub varied greatly, as did the rims, spokes, and tires. Everything was limited to an alloy of some kind, though you could have any spoke pattern you wanted, as long as it was 3-cross. At the time there was also a choice between tubular and clincher, which was a relatively new option. We labored over the choices and wound up having two wheelsets built – one clincher and aero; one box-section and tubular – a choice I stand by today.

That was my awakening, but nevertheless, I have throughout my life as a Velominatus had only one wheelset per bike. The lightest for Bike #1. Whenever Bike #n came into play, it received  its own wheelset; as with all the other parts on Bikes #2…n; a hand-me-down from Bike #n-1’s upgrade. (Using the Hand-Me-Down Upgrade Methodology, a single upgrade improves not just one bicycle, but several – with the added benefit of filling a longer period of time moving bits from one noble steed to the next.)

It was only recently, during preparation for the 2012 edition of Keepers Tour over the cobbles of Northern France and Vlaanderen, that I took my own place in the realm of the Specialty Wheelset – which also afforded me another of those moments when I was strangely aware of having crossed one of Those Lines. After all, a big, fat Dutchman can’t be expected to ride over the pavé of Paris-Roubaix – unleashing the awesome wattage of his artillery – on just any old wheelset; certainly not any of those wheels which I already owned. This called for a set of wheels purpose-built for the occasion. Rims, hubs, spokes, and tires were selected with great care and assembled (four times) in a wine-enhanced rite.

Riding these wheels is a pleasure highlighted by the fact that I don’t always ride them. They hang on the workshop wall in a wheel bag, waiting for the Right Occasion to ride them. Those occasions are often anticipated several days – if not weeks – in advance and deliberated over carefully. Then, when the choice is finally made to pop them in for the ride, I wrap myself in the delta between my regular wheels and these. This contrast, like the negative space in a great painting, is the area in which I dwell while riding them. The difference in tire type, width, spoke pattern, weight. The way the wheel feels when the pedal is engaged. The way the wheels and tires flex over a bump in the road or hug the pavement in a corner.

I’ve since embarked on a journey to get each road bike in the house – mine as well as the VMH’s – on the same drive train in order to be able to maximize the wheel-swapping effect. Each wheel is a new language, each tire a new dialect, and inner tube a new turn of phrase. To paraphrase the nursery rhyme: one for sorrow, two for joy, three for hills and four for stones.

frank

The founder of Velominati and curator of The Rules, Frank was born in the Dutch colonies of Minnesota. His boundless physical talents are carefully canceled out by his equally boundless enthusiasm for drinking. Coffee, beer, wine, if it’s in a container, he will enjoy it, a lot of it. He currently lives in Seattle. He loves riding in the rain and scheduling visits with the Man with the Hammer just to be reminded of the privilege it is to feel completely depleted. He holds down a technology job the description of which no-one really understands and his interests outside of Cycling and drinking are Cycling and drinking. As devoted aesthete, the only thing more important to him than riding a bike well is looking good doing it. Frank is co-author along with the other Keepers of the Cog of the popular book, The Rules, The Way of the Cycling Disciple and also writes a monthly column for the magazine, Cyclist. He is also currently working on the first follow-up to The Rules, tentatively entitled The Hardmen. Email him directly at rouleur@velominati.com.

View Comments

  • @the Engine I guess it is down to the manufacturer...some yrs ago I bought a Spesh Allez Elite (My first road bike since the age of about 10) and on the first ride a rear spoke on the Ritchey Wheels snapped on the first climb.  Took it back, they repaired it free of charge, next ride same again, they phone Specialized (the bike came as an all in one) they advised a free swap to Shimano 105 wheels but there were none in stock so they authorised a set of Mavic Cosmos wheels...bomb proof and lovely for such a budget wheel..This is a tricky area though, I play cricket and the problems are the same, with a bat you are using a piece of natural wood, nobody really knows how it will be until you use it.  The unwritten rule from real batmakers is, if it breaks in the first season you can have a free replacement.  After that you are on your own!

  • @the Engine

    Spokes can have manufacturing failure like anything else. There was a bad run of spokes that got put on about a million (exaggerating) cheap wheels that got stuck on hybrids and cheap MTBs, and the spokes broke in the middle (not near the j bend or nipple which is where they normally break), I think it was something to do with the anodising of the spokes weakening the metal. Non typical break.

  • @minion The infamous "rotten spokes" - most of them corroded from the inside out, so not sure if it was the colourisation process or just bad steel...

  • @SimonH theres an ex racer here in boston and he opened up a wheelbuilding business.  ive seen him lace up quite a few of these h plus son rims, which say HED C2 in the tire bed.  ive tried googling it all but cant find much.  can you shed some light on this?

    last night i got to thinking about trying my hand at building a set of wheels, afterall i have all winter to learn.  ordered a set of ck r45 hubs in mango.  the frame is nato green, so this buildup will be my version of peas and carrots.  they will sit at the center of nemesis rims.  have not decided on spokes or nipples.  from what im reading, brass is the preferred material over alloy wrt nipples?  is that just more internet bs or a pretty accurate statement?

  • @Oli

    @minion The infamous "rotten spokes" - most of them corroded from the inside out, so not sure if it was the colourisation process or just bad steel...

    Do you remember that short period of time in the early/ mid 90's when plastic bladed spokes were all the rage? Of course that turned out to be a horrible idea because of catastrophic wheel failure, but I'm trying to restore a period bike that had them. Do you have any idea of what I'm talking about/ where I might source a set?

  • @King Clydesdale

    @frank and all

    Thanks for the advice and support. Currently waiting prey on another wheelset, wish me luck.

    If it doesn't work out I have some surplus-to-needs wheelsets I can set you up with cheap or for the cost of shipping which I'd guess to be $30ish.  Not as nice as Ksyrium Equipes but better than what you have now.  If you're interested email @frank and ask him to forward to me.

  • @roger@SimonH

    theres an ex racer here in boston and he opened up a wheelbuilding business.

    Got my nemesis from him.  His wheels are the tits.  He has great things to say about the H Plus Sons.

  • @Nate Small world.  I'm looking at the Gallery now, you didnt get yours late July did you?  Seems like someone already did the nemesis with mango hubs.  At least I know it looks good.

  • @roger

    @Nate Small world.  I'm looking at the Gallery now, you didnt get yours late July did you?  Seems like someone already did the nemesis with mango hubs.  At least I know it looks good.

    No, got mine in December last year -- Christmas present for myself.  Silver Alchemy hubs -- my personal style is to run silver hubs.  But I love your peas 'n carrots idea.

  • @SimonH I've heard enough stories to never trust carbon on a rainy day, regardless of hyped "new technologies". For race-wheels, though... SES, Firecrests, HEDs and the latest Bontrager designs make a lot of sense when you think about it. I used to be into Formula 1 and used to pour over the details of every car - armchair aerodynamicist, so to speak - so lots of what's "cutting-edge" and revolutionary in cycling seems so normal to me. Trek's hype around the Speed Concept (and now Madone's) kamm-tail is downright laughable - that's '30s tech in the car-world.

    Myself, I'm quite smitten with HED's Flamme Rouge hubs - pretty light, very cool-looking and a buzz as divine as the Chris Kings. Either that, or the super-quiet whisper of a Dura-Ace.

1 12 13 14 15 16 20
Share
Published by
frank

Recent Posts

Anatomy of a Photo: Sock & Shoe Game

I know as well as any of you that I've been checked out lately, kind…

7 years ago

Velominati Super Prestige: Men’s World Championship Road Race 2017

Peter Sagan has undergone quite the transformation over the years; starting as a brash and…

7 years ago

Velominati Super Prestige: Women’s World Championship Road Race 2017

The Women's road race has to be my favorite one-day road race after Paris-Roubaix and…

7 years ago

Velominati Super Prestige: Vuelta a España 2017

Holy fuckballs. I've never been this late ever on a VSP. I mean, I've missed…

7 years ago

Velominati Super Prestige: Clasica Ciclista San Sebastian 2017

This week we are currently in is the most boring week of the year. After…

7 years ago

Route Finding

I have memories of my life before Cycling, but as the years wear slowly on…

7 years ago