This winter Shimano showed up on Maui with a flotilla of Colnago C-59s set up with disc brakes. The lucky Shimano people tested the bikes on some of the nicest routes on the island, including some descending down the Haleakala volcano. Unbelievably they didn’t invite me along (!?). If they had I would have suggested a different place to ride, one that is usually wet and full of descending corners. Any brake system and any tire works well on dry roads, maybe Shimano was here for the riding, not the testing.
Haleakala’s windward coast road is a sinuous mostly two lane magic carpet ride through rainforest. The road gains and looses elevation as it dives in to cross a river then climbs up out around the next headland, again and again. And it is often wet. If you want to find out if you trust your tires, this is the place.
I already know caliper brakes on machined aluminum rims are nearly worthless when it’s raining on this route. I have a theory that brake pads here get hardened by heat on steep dry descents and then they become hard grit holders, not good for braking when wet. Shimano should have done this ride in the rain.
There is a 10km section of this route that is mostly all down, 3-4% grade and there are many corners, a few a little off-camber. Two of us have lost it in different corners here. Both were the result of wet brakes, too much speed and a little inattention. The point is, caliper brakes suck in wet twisting descents.
To remedy this, the grand master of this ride, @mauibike, put on an ENVE road disc front fork on his Madone. His bike deserves its own article but suffice it to say his bike has some north shore Maui terroir. He is the only old school racer I know who never switched to clincher tires after his racing license expired. He is also now all carbone wheels, all the time. He has a bike that has been adapted to the terrain and it’s very cool.
I’m thinking about this because I would like to go all carbone wheel, all the time too. If Cancellara can race Milan-Sanremo, the Ronde and Paris-Roubaix all on the same carbon wheelset, I’m already persuaded. But carbon clinchers on Maui seem like a bad idea. There are a few steep descents with ninety-degree corners where one can’t help but get on the brakes long and hard. I foresee bad things happening to my front wheel and my beautiful face. I’ve used sew-up tires for years so I don’t fear them but I do like the simplicity of tire patching not involving sutures and a field operating theater. I think carbon tubulars are better for Maui but road disc seem much smarter. Why involve the carbon fiber rim in the braking at all? Steel seems like the material we want, it won’t wear and it conducts heat beautifully. Rain would only cool it down and improve its braking.
As a rider of SMP saddles and now Bont shoes, I’m clearly going for function over form and I don’t think I have large aesthetic issues with disc brakes. I do have a problem if they violate any principles of silence. No one needs to hear that screech on a road ride.
In my continuing series of “endorsing things I’ve haven’t used yet” (see tubeless tires). I’m liking the idea of a terroir bike, a bike that speaks to the roads it rolls on, and for Maui, that could include a front disc brake.
I know as well as any of you that I've been checked out lately, kind…
Peter Sagan has undergone quite the transformation over the years; starting as a brash and…
The Women's road race has to be my favorite one-day road race after Paris-Roubaix and…
Holy fuckballs. I've never been this late ever on a VSP. I mean, I've missed…
This week we are currently in is the most boring week of the year. After…
I have memories of my life before Cycling, but as the years wear slowly on…
View Comments
This is the first time that anyone has made an argument for disc brakes that is actually logic and not full of marketing speak and fanboy-ism.
@Gianni
At the very least you could sell it for a real bike.
@DerHoggz plus fucking one!
From the photo the riding looks magical! Jealous
@Stephen
And for that I apologize on everyone's behalf.
@DerHoggz
Wise ass.
@tessar
Dammit @tessar! How dare you use facts and logic to justify your opinions! Unacceptable.
I do take issue with #3: a tub is always going to corner better than a clincher at the same pressure. I know without doubt that I can hit a nasty switchback harder on my tubs than I ever would on clinchers. If people are rolling their tubs, they're not gluing them properly.
#4 is the tub's greatest, and most often ignored benefit. When glued properly, they're inherently safer than any other form-factor available.
@frank
Thanks, although I'm not certain I want to switch away from cork as thorough online research (20 minutes or so) seems to suggest that using anything other than cork on Bontragers will cause them to spontaneously combust, the undead to rise from the ground, and the universe to implode.
The upshot to this is that I've learned how much grip a 23c tire has (a lot) and how far you can lean the bike over (very) without sliding. Definitely helps your sharpen descending skills when slamming on the anchors isn't an option. Trail braking all the way to the apex is definitely your friend here.
Saw this from somewhere, somewhile ago;
me thinks they'll be like Spinergy wheels, after some meat is cut off someone in a mass pile up - that's road racing. (Michele Bartoli - Tour of Germany?) As for MTB/gravel, it's mainly single file.
@frank
Williams make a great pad (spec'ed to their wheels). They stop well, aren't fugly (re: cork), and don't wear that quick...
Of course, I don't brake that much, so maybe I'm not the best source on this.