If the road is the cathedral where we go to worship at the altar of Merckx then the workshop must surely be the rectory. The workshop of the Velominatus is semi-sacred space where one goes primarily to sharpen one’s tool of worship. In so doing, the workshop also provides a space in which to meditate on the machine, make repairs from rides gone by, and prepare for rides to come. The workshop may not be the space where we engage in our most revelatory work, however, the work we do there both before and after each ride is no less important than the work we do in between.
Though we have no Rules governing the workshop, I suggest the following is what constitutes good workshops:
Beyond these basic guidelines there are other considerations one can make in order to give their workshop an even more shrine-like aura. Your workshop or workspace might include some or all of the following:
Similar to our varied bikes and certainly to the vastly different places we all profess our devotion, our workshops are no doubt reflections of our own uniqueness as cyclists. That said, just as the Rules bind us, the spaces we retreat to in order to sharpen our tools should also provide us with a modicum of comfort in the familiar. In other words, I may not know my way around your kitchen straight away but if it’s a well appointed kitchen it shouldn’t take me long to learn my way around and start making good food. Take a minute to share what you appreciate about your workshop (or workspace if it serves secondarily as a living room or kitchen). Additionally, maybe you can share a workshop tale. For the workshop should not be overlooked as an integral room of the church in which we pray.
I know as well as any of you that I've been checked out lately, kind…
Peter Sagan has undergone quite the transformation over the years; starting as a brash and…
The Women's road race has to be my favorite one-day road race after Paris-Roubaix and…
Holy fuckballs. I've never been this late ever on a VSP. I mean, I've missed…
This week we are currently in is the most boring week of the year. After…
I have memories of my life before Cycling, but as the years wear slowly on…
View Comments
@Cyclops
Sounds like a much better use than the old config. One question, what's a "tape" in general, and "VHS" in particular?
@Oli
+1
@Bintang
Park makes some good ones, as do Tacx. There are two main approaches to stands - clamp-style and fork-mount style. Then there's folding ones for easy transport, and models that bolt to the floor. The clamp is quick and easy, but we don't like squeezing our tubes too tightly, so be careful. Fork mounts are flexible and feature in A Sunday In Hell, which means I really feel that's the way to go.
I use a clamp-style stand because it was given me by my Cycling Sensei and I've never prioritized the cost of replacing a perfectly functioning stand over other bike gear. Just make sure its solid so it doesn't fall over and you'll be in good shape.
Since I don't own a stand, I tend to use my trainer when I need to work on the bike.
@frank
VHS is to DVD as LPs are to CDs. They just don't look as "warm".
@Cyclops
Fixed your post.
my workshop is half a double garage detached from the ole cabin. Handy distance from the VMH, handy for me to go wrench in when she cycles herself. so i do.
Mine is a shop for not only the bikes, which was its primary purpose...bike work area, work shop, storage, but also for the Landcruisers which I love. My FJ60 and FJ80. I also wrench on my lawn mowers, and tractor an old Allis-Chalmers, so it serves a great purpose. On the wall is my posters, my ribbons, my numbers, a 'dirt rag' steel worker poster here, a bunch of Velodrome retro posters there, and a standup coke machine working/buzzing quietly in the corner. CD player and radio cockeyed in another. My shop sounds like ChrisO's generally, but I admit, my sin is it is dirty, it is utilitarian, it is in use almost daily. On the work bench are various lubes are scattered, at least 3 bins of grease that I know of, in a corner are a bag of rags, hanging from rafters are tyres, wheels, the lites are dim, the drawers are usually left hanging open for access to the tools and a few are left on the table because I always find a use for my Park 3 way 4/5/6mm wrench. Hanging on the board are various used cables, housing and all encircled one another, and a old whiskey jug in the opposing corner. The trash bin is full of wrappers, boxes from bar tape, and empty bottle of Rock-n-Roll Gold, and tubes hang off the corner of the stand, which i am prepping for repairs soon. I even have a mouse, who is nestled in behind the spare parts chest, who i haven't been able to run off. Its a rather disorganized mess, except in my mind, where I know where every single bolt, nut and driver is at, every spare tube, patched or not. I was always taught a working shop is never clean, as there is something more important to be done, such as is maintenance. Your never done.
I admit my sin when i own it and my shop doesn't look at all like the above. Chapeau for those who do, I admire that and will attain it one day!
This is a great piece. A really nice contribution. As others have lamented, the architecture of my current humble abode prohibits a shop. However, that does not keep me from lusting after others, and pondering how to remedy the situation. I have basically 2 choices:
1. Rent a u-storage place, and accessorize it properly; or
2. Replace my beat to fuck garden shed with a pre-fab outbuilding outfitted for the job.
#1 certainly has less up front costs, and has the advantage of being able to share with other local Velominati. I could see a small cogality (!) forming something of a meeting place so as to labour undisturbned by non-VMH honey-dos. OTOH, this option also carries with it the inability to do quick tasks without commuting;
#2 costs more, but is more in tune with the needs of the job. It's just...difficult to arrange the logistics. Properly sized, it can have all the features Marco describes.
All it takes is dead presidents in quantity.
@ cyclops: i must have misread your post, you don't cycle indoors...right? Please tell me I am wrong. You don't basque in the warmth of the house, spinning like a rat in a cage with your VMH rubbing your shoulders the whole entire way, tipping your water bottle up for you between intervals, running to the kitchen preparing your musette on the long spins...please, please don't tell me. I thought there were rules on this???
@Souleur
You paint a vivid picture of your space and something tells me it was all from memory. Sounds like a nice little haven. It also sounds like you and I may share some similarities of lifestyle; rural, outbuildings, tractors, welders, self-reliance. In my opinion the modern day renaissance man does not dwell in the manufactured culture of dimmed enlightenment and of the Jones' keeping up with the rat race. The modern day renaissance man lives within himself in the pursuit of self-reliance and mastery, and through challenging the status quo.
for fuck's sake - no excuse for this - reflection of my mind probably - need to give up a sport, or maybe the house